Tonga 2 Linux Change History

2010-05-12

New NAND driver fixes several bugs and increases performance.
NOTES: The OOB layout has changed, you cannot use filesystems flashed 
       with the old U-Boot release.
       This bootloader is not able to replace itself, you need to use 
       J-Link Commander to replace it.
       Do not worry about bad error messages if you start your updated
       U-Boot - they will go away once you have installed a kernel image.
       If you do have the environment from an old U-Boot in flash you
       might need to change the boot command to this:
       setenv bootcmd nand read 0x40600000 0x80000 0x200000 \; bootm 0x40600000

USB support is enabled as well as HID and storage drivers in kernel.