Index of /downloads/tonga-demo/Release-20100830

[ICO]NameLast modifiedSizeDescription
[DIR]Parent Directory  -
[TXT]Changes-U-Boot.txt15-Sep-2010 11:29 2.3K
[ ]Developers Manual TongARM - V1 7_September-eng.pdf08-Sep-2010 16:00 4.8M
[TXT]Readme.txt15-Sep-2010 16:45 1.0K
[ ]defconfig15-Sep-2010 16:00 44K
[DIR]demo-rootfs/05-Feb-2011 19:38 -
[ ]linux-tmpa-2.6.34-100903.tar.bz203-Sep-2010 19:10 65M
[ ]openocd-tonga.cfg02-Feb-2011 19:55 2.0K
[TXT]releasenotes.txt31-Aug-2010 18:02 1.9K
[ ]u-boot03-Sep-2010 12:47 876K
[ ]u-boot-tmpa-100903.tar.bz203-Sep-2010 19:13 8.6M
[ ]u-boot.bin03-Sep-2010 12:47 227K
[ ]u-boot_nand_tonga2.bin03-Sep-2010 12:47 355K
[ ]uImage03-Sep-2010 16:05 2.1M
[ ]uImage-defconfig.gz15-Sep-2010 11:22 10K
[ ]uImage-tonga03-Sep-2010 16:05 2.1M
Readme.txt
	This file.

u-boot
	U-Boot ELF format. Suitable for downloading e.g. via JTAG
	(e.g. OpenOCD)

u-boot.bin
	U-Boot raw binary. Suitable for direct RAM execution,
	start address is 0x43f00000

u-boot_nand_tonga2.bin
	U-Boot image to be flashed into NAND flash starting from
	NAND address 0x00 (MTD partition "u-boot")

uImage
uImage-tonga (same as uImage, just for convenience)
	Kernel uImage - flash to "kernel" NAND partition

defconfig
uImage-defconfig.gz
	Kernel configuration of the above pre-compiled uImage - this is
	*not* the tonga defconfig contained in the kernel sourcecode

demo-rootfs/
	directory containing some rootfs-images for demo and test
	purposes, created with uTIB http://www.mucross.com
	can be flashed into "rootfs" MTD partition

openocd-tonga.cfg
	Sample config file for OpenOCD JTAG software using the
	FTDI based USB ARM JTAG interface

Developers Manual TongARM - V1 7_September-eng.pdf
	Full manual for using Linux especially on the Tonga2 platform